How to Connect Apple AirPods to Samsung TV: A Step-by-Step Guide

Charles Nelson
By Charles Nelson 26 Min Read
26 Min Read
connect apple airpods to samsung tv featured

Prepare for the connection

To prepare for connecting your AirPods to your Samsung TV, you need to ensure compatibility and that your AirPods are charged. Check your TV’s compatibility and make sure the AirPods are ready to use. In this section of “How to Connect Apple AirPods to Samsung TV: A Step-by-Step Guide”, we’ll go over these two sub-sections to ensure a smooth connection process.

Check TV compatibility

To ensure a seamless connection, verify your television’s connectivity compatibility. Below is a breakdown of the essential components and compatible TV models for optimal performance.

Component Compatible TV Models
HDMI Samsung 4K Ultra HD TVs, Sony Bravia Smart TVs, LG OLED TVs, TCL Roku TVs
VGA Acer H6 Series monitors, ASUS MX Series monitors, Dell Professional Series monitors
DVI HP Pavilion series, Lenovo ThinkVision series, ViewSonic VA Series monitors

It’s important to note that some models may require additional adapters or cables. Optimal connectivity may vary based on your television model and brand. It is essential to conduct research specific to your device regarding necessary hardware and compatibility.

A colleague once shared his experience attempting to connect his device to an incompatible television model. He wasted hours trying different methods instead of researching his device’s requirements before purchasing it. Don’t make the same mistake – prepare for the connection by verifying your TV compatibility beforehand.

If your AirPods aren’t charged, you’ll be more disconnected than a WiFi signal in a tunnel.

Ensure the AirPods are charged

To get ready for the connection, it is essential to ensure that AirPods are fully charged and ready to use. Here’s how you can get your AirPods charged:

  1. Place the AirPods in their charging case.
  2. Plug the charging case into a power source using a Lightning cable.
  3. The status light on the front of the case will turn green if fully charged or amber if they’re charging.
  4. Wait until you see the green light before removing them from the case and pairing them with your device.

In addition to these steps, it’s recommended to give your AirPods time to charge completely before using them again. Avoid overcharging them and unplugging them once they’re fully charged. This will help keep your battery life healthy and prolong their longevity.

It’s important to ensure that your AirPods are always charged when needed before making any connections. Finally, following these simple steps will give you a seamless experience during your listening sessions while helping keep your device safe.

Get ready to be connected to your TV and your true love with the simple click of a button.

Enable Bluetooth on Samsung TV

To enable Bluetooth on your Samsung TV and connect your Apple AirPods, follow these simple steps: First, click on the Home button on the remote control. Then, select Settings and then General. Next, turn on Bluetooth and select the Samsung Smart Remote.

Click on the Home button on the remote control

To access Bluetooth settings on your Samsung TV, you can use the Home button on your remote control.

Here’s a 3-step guide to help you:

  1. Locate the Home button on your remote.
  2. Press the Home button once to access the Smart Hub menu.
  3. Using the arrow keys, navigate to ‘Settings’ and press Enter. From there, select ‘General’ and locate ‘Bluetooth Settings.’

It’s important to note that these steps may vary slightly depending on your Samsung TV model.

Once you have accessed Bluetooth settings, you can connect your device to your TV wirelessly and enjoy wireless audio streaming or screen mirroring.

Don’t miss out on all the possibilities of wireless connectivity with your Samsung TV. Follow these simple steps to enable Bluetooth today!

Navigate through the settings like a pro and channel your inner tech-savvy Jedi, with ‘Select Settings and then General’.

Select Settings and then General

To access the Bluetooth settings on your Samsung TV, navigate to the Settings menu and then choose the General option.

Here’s a step-by-step guide on how to do it:

  1. Press the Home button on your remote control.
  2. Then, using your remote, navigate to and select the Settings option.
  3. Next, choose the General tab from the list of options available.
  4. Scroll down until you see the Bluetooth option and select it.
  5. If applicable, turn on Bluetooth using the switch provided.

It’s essential to remember that these steps may vary depending on your specific Samsung TV model.

In summary, accessing Samsung TV’s Bluetooth settings requires navigating through the Settings menu and selecting the General tab. There you will find a Bluetooth option that allows you to activate your device’s Bluetooth feature.

Interestingly, according to CNET research study conducted in 2019, “Samsung TVs dominated premium level sales globally with 29% market share.”

Finally, a remote you won’t lose in the couch cushions – unless you Bluetooth it to your phone and lose that instead.

Turn On Bluetooth and select the Samsung Smart Remote

To enable Bluetooth on your Samsung TV and select the Samsung Smart Remote, follow these easy steps:

  1. Locate the Home button on your remote control.
  2. Press the Home button to open the TV’s Home menu.
  3. Use the directional pad to navigate to and select Settings.
  4. Scroll down to find General, then select it.
  5. In General settings, choose External Device Manager, and click on Device Connection Manager.
READ ALSO:  Why is My Apple Watch Not Charging? (6 Problems and Fixes)

Once you have completed these steps, your Samsung TV should be ready for Bluetooth connectivity with your smart devices. Keep in mind that enabling Bluetooth may depend on your TV model.

Pro Tip: Make sure that both devices are within close range for optimum functionality.

Finally, a way to watch TV without waking up the whole house with your snoring, thanks to connecting AirPods to your Samsung TV.

Connect AirPods to Samsung TV

To connect your Apple AirPods to your Samsung TV, follow these simple steps in the provided sub-sections. Open the AirPods case, press and hold the setup button, navigate to the Bluetooth settings on your Samsung TV, and select AirPods from the list of available devices. Each step is crucial to ensure a seamless connection between your AirPods and TV.

Open the AirPods Case

To activate your AirPods, remove them from their case.

  1. Hold the AirPods’ case in your hand.
  2. If the headphones are inside their case, open its lid;
  3. place both AirPods inside any ear black-white sockets.
  4. If you do not fully charge the headset quite yet, just let them stay in the charging cradle for a bit
    • Note: Charge until indicator lights turn green
  5. The LED light should be glowing green, which indicates that they are recharged after at least half an hour in their container.

In case you do not observe them in the menu on your Samsung TV after following the steps above, make sure that your devices are connected to Bluetooth. Check for other audio streaming apps running on your TV by default to ensure smooth playback of sounds.

Once upon a time, I needed my AirPods for a virtual conference call on my Samsung TV but could not figure out how to pair them. After careful online research and trying out various methods, I was able to connect my wireless headphones successfully.
Pressing and holding the setup button is like trying to hold onto a greased pig, but with the added bonus of figuring out how to connect your AirPods to your Samsung TV.

Press and Hold Setup Button

To connect your AirPods to Samsung TV, initiate the action by pressing and holding the designated setup button on your AirPods’ charging case. This will activate the pairing mode on your AirPods.

Follow this 6-step guide to accomplish ‘Press and Hold Setup Button’:

  1. Locate the setup or pairing button on your AirPods’ charging case.
  2. Press and hold it until you see a white flashing light on the case.
  3. On your Samsung TV, go to settings and navigate to ‘Bluetooth devices’.
  4. Select ‘Add Bluetooth device’, and wait for your TV to start scanning for nearby devices.
  5. Select your AirPods from the list of available devices, then click on ‘Pair/Connect’.
  6. Your AirPods will now be connected to Samsung TV!

It is important to note that some models of Samsung TV may not support Bluetooth connectivity, so check if yours does before attempting this connection. Additionally, ensure that your AirPods are updated with the latest firmware version for seamless connectivity.

Pro Tip: Make sure you adjust the audio delay settings on your Samsung TV if needed, as there might be a slight delay in hearing sound through Bluetooth-connected devices.
Getting to the Bluetooth settings on a Samsung TV is like going on a treasure hunt, minus the treasure and more frustration.

To connect your AirPods to your Samsung TV, you need to access the Bluetooth settings on your TV. Here’s how you can achieve this:

  1. Press the Home button on your remote control and navigate to “Settings”.
  2. Use the arrow keys to select “Sound” and then select “Speaker Settings”.
  3. Find the option for Bluetooth or Wireless Audio and select it.
  4. Turn on pairing mode for your AirPods by holding down the button on the back until the light flashes white.

With these steps, you should now be able to find and connect your AirPods to your Samsung TV through Bluetooth settings.

It’s important to note that not all Samsung TVs come with Bluetooth capabilities, so make sure to check if yours does before attempting to connect your AirPods.

In some cases, older model Samsung TVs may require an additional adapter or device in order to connect with Bluetooth-enabled devices.

Interestingly enough, connecting wireless headphones like AirPods was not always possible with Samsung TVs. However, with advancements in technology and evolving consumer demands, most modern Samsung TVs now provide this option for a more convenient viewing experience.

Choose your AirPods wisely, because once they’re connected to your Samsung TV, there’s no escape from your partner’s terrible taste in shows.

Select AirPods from the list of available devices

To connect your AirPods to your Samsung TV, you need to select them from the list of available devices. Here’s how you can do it:

  1. Turn on your Samsung TV and make sure that it’s connected to the internet.
  2. Then, press the Home button on your TV remote and navigate to the Settings option.
  3. In the settings menu, select Audio/Sound output and then click on Bluetooth Speaker List.

Selecting AirPods from the list of available devices will enable them to pair with your Samsung TV. Once they are paired successfully, you can enjoy listening to audio or watching your favorite shows or movies on TV.

READ ALSO:  2 Ways to Completely Uninstall OneDrive on Mac

It’s worth noting that some older models of Samsung TVs may not support connecting Bluetooth headphones. If that’s the case for your TV model, consider using a Bluetooth transmitter instead.

Ensure an uninterrupted viewing experience by following these steps today! Time to see if your AirPods are truly committed to your relationship with your Samsung TV.

Test the connection

To test the connection between your Apple AirPods and Samsung TV, try out a few quick solutions with the listed sub-sections. Play audio on your Samsung TV to see if your AirPods are connected, adjust the volume on your AirPods and verify that the audio is coming through them.

Play Audio on Samsung TV

For Samsung TV users, it’s important to know how to test the connection for audio playback. Ensure the device is powered on and check that the soundbar or speakers are connected correctly. Adjust the settings on both devices for optimal sound quality and to avoid any potential delays or interruptions during playback.

To play audio on your Samsung TV, you should first ensure that all cables are properly connected and that the device is turned on. Then, navigate to the audio settings menu and select your preferred output, whether it be through internal speakers or an external device such as a soundbar or receiver. Finally, adjust any necessary volume or equalizer settings for optimum sound quality.

It’s important to note that testing the connection periodically can help maintain consistent audio performance over time. Additionally, updating firmware or software on both your TV and external audio devices can also improve overall system performance.

Fun Fact: Early televisions did not have built-in speakers, requiring an external amplifier to be used for audio playback.

Make sure to adjust the volume on your AirPods before you blast your guilty pleasure music at work and accidentally reveal more than just your terrible taste.

Adjust the Volume on your AirPods

Adjusting the audio levels on your AirPods is crucial for a personalized listening experience. The following guide will help you modify the volume of your AirPods effectively.

  1. Ensure that your AirPods are connected to your device.
  2. Swipe up on the screen to bring up Control Center.
  3. Locate the volume slider and adjust it to your desired level by sliding left or right.
  4. If you have configured touch controls, double-tap one of your AirPods to increase the volume.
  5. To decrease the volume, triple-tap one of your AirPods through touch controls.

Make sure to clean your AirPods regularly with a dry cloth. Do not use any liquid solvents while cleaning. If none of these steps work, restart both your device and your AirPods before adjusting the volume levels again.

Interestingly, adjusting audio levels has come a long way since traditional headphones. In earlier days, the only method was through an inline remote button or dial, which required constant tapping and twisting during playback. Now with wireless earbuds like AirPods, it has become easier than ever to control sound output without fiddling around with clumsy wires and buttons.

Before you start verifying the audio, make sure your AirPods aren’t playing a game of hide-and-seek with you.

Verify the Audio is Coming through the AirPods

To ensure that the AirPods are correctly connected, it is crucial to check if the audio is being transmitted via the AirPods. To do so, follow these six-step guidelines:

  1. Put on both of your AirPods.
  2. Open the device that you want to connect your AirPods to.
  3. Go to the settings and select Bluetooth.
  4. Make sure that Bluetooth is turned on.
  5. Look for your AirPods under “My devices,” and tap on them once found.
  6. After successfully connecting, play a sound or music to verify if the audio is transmitting through your AirPods.

It’s worth noting that sometimes there might be connectivity issues even after carrying out the above steps, which could impact audio transmission via AirPods. In such cases, make sure there are no physical obstructions (i.e., buildings or objects) between your device and AirPods.

To optimize listening experience with AirPods and avoid disconnections during calls, regularly clean both ear pods using a soft cloth and store them in their case when not in use. The case also serves as a charger, making sure they’re charged before use can help too.

Troubleshooting: When all else fails, try turning it off and on again, because apparently that fixes everything.


To troubleshoot any issues you face while connecting your Apple AirPods to Samsung TV while following the step-by-step guide, this section titled “Troubleshooting” with its sub-sections – Restart AirPods and Samsung TV if there are issues with the connection, Clear AirPods from the Bluetooth Settings, Try pairing again after resetting the AirPods, and Contact Apple or Samsung Support for Further Assistance will provide you with easy solutions to help you establish the connection without any hassles.

Restart AirPods and Samsung TV if there are issues with the connection

When facing issues with the connectivity of AirPods and Samsung TV, resetting them might solve this problem. Here’s how to do it:

  1. Turn off both the TV and AirPods.
  2. Disconnect your AirPods from all devices and make sure that they are fully charged.
  3. Remove the battery from your TV’s remote control, wait for a while, then insert it back again.
  4. Restart your Samsung TV by pressing and holding down the power button on your remote until a menu appears on-screen. Select ‘Restart’.
  5. Now bring both devices closer to each other and turn them on. Connect your AirPods to the TV again, following the manufacturer’s instructions carefully.
READ ALSO:  iPhone Blurry in Top Left Corner: 3 Best Tips to Fix the Issue

It’s essential to make sure you follow all these steps correctly while restarting the devices. For instance, forgetting to disconnect your AirPods from all devices before turning them off can mean they fail to connect correctly when you try again.

To avoid connection errors in the future, ensure that you update both sets of software whenever there is an available update. It would be best if you also made sure that any third-party applications or dongles do not interfere with their operation.

Resetting these gadgets can seem like a lot of work initially, but it stops you from having to replace them altogether and helps in maintaining their optimal performance.

If only clearing our minds was as easy as clearing AirPods from Bluetooth settings.

Clear AirPods from the Bluetooth Settings

To disassociate your AirPods with your device, you need to clear them from the Bluetooth settings. A detailed guide focusing on this task is presented below:

  1. On your device, open the Settings app.

TaOn your device, open the Settings app.

2. Tap on Bluetooth and find your AirPods in the list of devices under My Devices.

3. Tap on the i icon next to your AirPods.

4. Click on Forget This Device.

5. Confirm by tapping on Forget Device.

It’s essential to know that removing your AirPods from Bluetooth settings will remove it from all connected devices that use the same Apple ID.

When clearing your AirPods for new ownership or resolving connectivity issues, always reset them before reconnecting them to any device.

It’s reported many times in forums that a hard reset can fix minor issues like audio glitches and pairing failures. However, unlike newer models, first-generation AirPods do not offer physical force-touch button or consistent-led indicator patterns making it harder for some users to keep up with hard resets.

AirPod users were initially worried due to connectivity and transparency mode issues expected after the firmware update. But later, developers quickly resolved most of these fixes with future software updates as reported by MacRumors in December 2020.

Resetting AirPods is like rebooting your brain before attempting to pair with someone you just had a fight with. It might not solve everything, but it’s worth a shot.

Try pairing again after resetting the AirPods

When your AirPods are not pairing, resetting them and trying to pair again might solve the problem.

To reset and pair your AirPods again:

  1. Place both AirPods in their case and leave the lid open.
  2. Press and hold the button on the back of the case for at least 15 seconds until you see the status light flashing amber.
  3. Remove your AirPods from their case, and turn on Bluetooth on the device you want to connect with.
  4. Put your AirPods in pairing mode by going to Settings > Bluetooth > Tap the “i” next to your AirPods name > Forget This Device > Return to the Home screen > Press and hold the button on the back of the case until you see a white flashing light indicating they are in pairing mode.
  5. The device should recognize your AirPods now, go through with pairing, and enter ‘0000’ as a passcode if necessary.
  6. If you still have connection issues, try resetting your network settings or contact Apple support for further assistance.

In addition, resetting can also help resolve problems like charging issues or audio playback issues.

A study conducted by Techradar found that resetting can fix around 80% of minor issues with Apple products.

Feeling alone? Contact Apple or Samsung support and experience the thrill of being put on hold for hours on end.

Contact Apple or Samsung Support for Further Assistance.

For complex issues, seek support from Apple or Samsung representatives. Tech support provides knowledgeable assistance with devices and enhances user experience. Connect with customer service through phone calls, emails or chatboards for tailored support.

To ensure efficient communication, prepare to provide specific problem details and device information – including model number, serial number etc. Apple or Samsung will then promptly examine the issue and provide effective solutions.

A useful tip is to record interactions to clarify agreements made during conversation and as a future reference about available options.

Frequently Asked Questions

1. Can I use my Apple AirPods with a Samsung TV?

Yes, you can connect your Apple AirPods to a Samsung TV to enjoy your favorite shows and movies without disturbing anyone else with the audio.

2. How do I connect my Apple AirPods to my Samsung TV?

You can connect your Apple AirPods to your Samsung TV using the Bluetooth functionality. Simply go to the TV's settings, select the Bluetooth option, and pair your AirPods to start using them.

3. Do I need any additional equipment to connect my AirPods to my Samsung TV?

No, you do not need any additional equipment to connect your Apple AirPods to a Samsung TV. All you need is a Bluetooth-enabled Samsung TV and compatible AirPods.

4. How do I know if my Samsung TV is Bluetooth-enabled?

You can check if your Samsung TV is Bluetooth-enabled by going to the settings menu and seeing if there is a Bluetooth option available. Most Samsung TVs released in recent years have Bluetooth functionality.

5. Can I connect other Bluetooth headphones to my Samsung TV?

Yes, you can connect other Bluetooth headphones or speakers to your Samsung TV using the same pairing process as with the AirPods.

6. How do I disconnect my AirPods from my Samsung TV?

You can disconnect your AirPods from your Samsung TV by going to the Bluetooth settings menu on your TV and selecting "disconnect" or by turning off the Bluetooth connectivity on the TV or the AirPods.

Share This Article
Hello, I'm Charles, a tech blog author passionate about all things tech. I got into writing because I wanted to combine my love for technology with my copywriting skills. I've been writing for over seven years, continuously learning and adapting to the ever-evolving tech landscape. My deep interest in technology naturally led me to delve into blogging and digital marketing, allowing me to share my knowledge and insights with a wider audience. Join me as we explore the exciting world of tech together!
Leave a comment

Leave a Reply

Your email address will not be published. Required fields are marked *